Hei-Tec

Magnetic Stirrer

Hei-Tec with Pt 1000 temperature sensor (V4A)

P/N: 505-30081-00

  • This variant includes the Pt 1000 temperature probe – for precise temperature control, overshoot protection and reproducible results
  • This unit features a digital display and allows for easy setting and monitoring of values in the illuminated readout
  • For your protection an independent safety circuit will switch off heating if hotplate temperature exceeds 25 °C over set temperature
  • Digital speed setting from 100 to 1,400 rpm at an accuracy of ± 2 % and temperature setting up to 300 °C
  • A separate on/off switch for heating prevents an unintentional heat-up. If heating is switched on the on/off button is illuminated for visual control. In addition, a residual heat indicator prevents from burning hazards when heat function is switched off
  • An illuminated button indicates clearly if the stirring mode is activated
  • To protect your sample from overheating a safety circuit switches off heating if the temperature sensor is not immersed in your media vessel

Varyantlar


Hei-Tec

P/N: 505-30000-00

  • This unit features a digital display and allows for easy setting and monitoring of values in the illuminated readout
  • For your protection an independent safety circuit will switch off heating if hotplate temperature exceeds 25 °C over set temperature
  • Digital speed setting from 100 to 1,400 rpm at an accuracy of ± 2 % and temperature setting up to 300 °C
  • A separate on/off switch for heating prevents an unintentional heat-up. If heating is switched on the on/off button is illuminated for visual control. In addition, a residual heat indicator prevents from burning hazards when heat function is switched off
  • An illuminated button indicates clearly if the stirring mode is activated
  • Upgrade this magnetic stirrer with the optional Pt 1000 temperature sensor for precise temperature control, overshoot protection and reproducible results
  • To protect your sample from overheating a safety circuit switches off heating if the temperature sensor is not immersed in your media vessel

Varyantlar


Performance and Accuracy

Take advantage of a built-in PID controller that ensures fastest heat-up times while preventing an overtemperature situation of your sample.

 

 

 

 

 

Hei-Tec - Ürün Avantajları

To prevent accidents or laboratory fires, all magnetic stirrers feature two independent safety circuits which switch off heating in case of any overtemperature situation

In combination with Heat-On attachments you can convert your lab into a “safety zone"

A residual heat indicator for all models prevents you from potential burning hazards

For your safety, the unit will power off in case of a short-circuit, a damage to the temperature sensor, a motor failure or other incidences during operation

A separate on/off switch for heating prevents unintentional heat-up. If heating is switched on, the on/off button is illuminated for visual control

To protect you from splashes and scalding from bath media, rotation speed ramps up slowly until unit has reached the pre-programmed speed

Even if the stirrer is exposed to the highest temperatures, damage is categorically ruled out – all models come with a fire-resistant die-cast housing

All units with digital display allow for easy setting and monitoring values on the illuminated readout

You can even work with dry ice – a robust thermal insulation prevents corrosion inside the housing by preventing condensate from collecting and dripping on any electronic components

The unique Kera-Disk® coating is extremely chemical-resistant and scratch-proof, and therefore the plate can be cleaned easily from solvents, oil or other contaminations

The strong magnetic field allows for easy stirring of even higher viscosity media

In case the heating function fails, stirring will not be discontinued to avoid thermal damage to your sample

The hermetically-sealed housing protects all mechanical and electronic components from aggressive environments

The maintenance-free non-sparking motors reduce down times

The design and features give an increased lifespan of 10 years along with significantly reduced maintenance and repair costs

Hei-Tec - Teknik veri

Rotasyon hız derecesi100 - 1,400 rpm
Hız doğruluğu±2 %
Maksimum karıştırma kağasitesi (H2O)20 l
Isıtıcı plaka sıcaklığı20 - 300 °C
Isıtma gücü800 W
Doğrul sıcaklık ayarları±1°C
Dışarıdan sıcaklık sensörü olmadan sıcaklık doğrulaması±1 °C
Güvenli döndürmeli ısıtıcı plaka25 °C over hotplate temperature
Ülaka çapı ø145 mm
Plaka materyaliKera-Disk® (Silumin with ceramic coating)
Sensör kırılma korumasıWith Pt 1000
Kalan ısı göstergesi
Düzgün başlama
Analog/ dijital arayüz-
Zamanlayıcı-
Koruma sınıfı DIN EN 60529IP 32

Hei-PLATE - AddOns

Heat-On Attachments

StarFish Workstations

Findenser ™

High performance condenser

İndirilenler

İndirilenler

Technical-Overview-Magnetic-Stirrers.pdf İndir
At a glance - Hei-PLATE 2018 İndir
CE-Magnetruehrer-Magnetic-stirrer.pdf İndir
NRTL-Certificate-Magnetic-stirrer.pdf İndir
Hei-PLATE-Certificate-for-continuous-operation.pdf İndir
Brochure-Gentle-but-powerful-2020-EN.pdf İndir
Operation-Manual-Magnetic Stirrer-Hei-Standard-Tec-Connect.pdf İndir

Video