Replace the heating baths and heating mantles in your laboratory and reduce the risk of fire and burns.
Many chemical reactions need a constant input of heat to speed up the functional sequence. This is usually achieved by immersing the reaction vessel in heating baths.
The Heat-Ons are innovative attachments that work without the need for heat transfer media such as water or oil. This is an efficient way of heating round bottom flasks with capacities from 10 ml to 5 liter.
The Heat-On Blocks are made of PTFE coated aluminum. This guarantees not only the fastest heat transfer and easy cleaning but also scratch and chemical resistance.
The Heat-On Blocks are available in standard sizes for round bottom flask and multinecked flasks with capacities up to 5 liter. For reactions with a single flask.
The Multi-Well series complements the Heat-On product range with inserts up to 150 ml. These can be optimally placed in pairs in a Multi-Well holder on the hotplate. This makes optimum use of the available space.
So you can dispense with heating bath liquid with no loss of productivity. Resource-friendly and inexpensive, the Heat-On Blocks help you avoid potential dangers such as burns and minimize cleaning costs caused by oil dripping from flasks when they are removed from oil baths.
The table below shows the heating times of different quantities of water up to the boiling point using different sizes of Heat-On Blocks. The heating plate temperature of the magnetic stirrer used for this purpose was set to the maximum value.
|10 ml||6 ml||300 °C||6.8 min|
|25 ml||15 ml||300 °C||8.0 min|
|50 ml||30 ml||300 °C||8.5 min|
|100ml||60 ml||300 °C||8.8 min|
|150 ml||100 ml||300 °C||10.0 min|
|250 ml||150 ml||300 °C||10.8 min|
|500 ml||300 ml||300 °C||16.4 min|
|1,000 ml||600 ml||300 °C||21.1 min|
|2,000 ml||1,200 ml||300 °C||35.1 min|
|3,000 ml||1,800 ml||300 °C||47.3 min|
|4,000 ml||2,400 ml||300 °C||51.0 min|
|5,000 ml||3,000 ml||300 °C||75.5 min|