Hei-Tec with Pt 1000 temperature probe

Magnetic Stirrer

Hei-Tec with Pt 1000 temperature probe

P/N: 505-30081-00

  • This variant includes the Pt 1000 temperature probe – for precise temperature control, overshoot protection and reproducible results
  • This unit features a digital display and allows for easy setting and monitoring of values in the illuminated readout
  • For your protection an independent safety circuit will switch off heating if hotplate temperature exceeds 25 °C over set temperature
  • Digital speed setting from 100 to 1,400 rpm at an accuracy of ± 2 % and temperature setting up to 300 °C
  • A separate on/off switch for heating prevents an unintentional heat-up. If heating is switched on the on/off button is illuminated for visual control. In addition, a residual heat indicator prevents from burning hazards when heat function is switched off
  • An illuminated button indicates clearly if the stirring mode is activated
  • To protect your sample from overheating a safety circuit switches off heating if the temperature sensor is not immersed in your media vessel

Performance and Accuracy

Take advantage of a built-in PID controller that ensures fastest heat-up times while preventing an overtemperature situation of your sample.

 

 

 

 

 

Hei-Tec with Pt 1000 temperature probe - benefits

To prevent accidents or laboratory fires, all magnetic stirrers feature two independent safety circuits which switch off heating in case of any overtemperature situation

In combination with Heat-On attachments you can convert your lab into a “safety zone"

A residual heat indicator for all models prevents you from potential burning hazards

For your safety, the unit will power off in case of a short-circuit, a damage to the temperature sensor, a motor failure or other incidences during operation

A separate on/off switch for heating prevents unintentional heat-up. If heating is switched on, the on/off button is illuminated for visual control

To protect you from splashes and scalding from bath media, rotation speed ramps up slowly until unit has reached the pre-programmed speed

Even if the stirrer is exposed to the highest temperatures, damage is categorically ruled out – all models come with a fire-resistant die-cast housing

All units with digital display allow for easy setting and monitoring values on the illuminated readout

You can even work with dry ice – a robust thermal insulation prevents corrosion inside the housing by preventing condensate from collecting and dripping on any electronic components

The unique Kera-Disk® coating is extremely chemical-resistant and scratch-proof, and therefore the plate can be cleaned easily from solvents, oil or other contaminations

The strong magnetic field allows for easy stirring of even higher viscosity media

In case the heating function fails, stirring will not be discontinued to avoid thermal damage to your sample

The hermetically-sealed housing protects all mechanical and electronic components from aggressive environments

The maintenance-free non-sparking motors reduce down times

The design and features give an increased lifespan of 10 years along with significantly reduced maintenance and repair costs

Hei-Tec with Pt 1000 temperature probe - technical data

Rotation speed range100 - 1,400 rpm
Speed accuracy±2 %
Maximum stirring capacity (H2O)۲۰ l
Hotplate temperature20 - 300 °C
Heating power۸۰۰ W
Accuracy temperature setting±1°C
Temperature accuracy with external temperature sensor±1 °C
Safety circuit hotplate25 °C over hotplate temperature
Plate diameter ø۱۴۵ mm
Plate materialKera-Disk® (Silumin with ceramic coating)
Sensor breakage protectionWith Pt 1000
Residual heat indicator
Smooth start
Analog / Digital interface-
Protection class DIN EN 60529IP 32

Hei-PLATE - AddOns

Heat-On Attachments

StarFish Workstations

Findenser ™

High performance condenser

Hei-Tec with Pt 1000 temperature probe - accessories

1-l Heating bath

PTFE-coated

2-l Heating bath

PTFE-coated

2-l Heating bath for oil

Max. temperature 250 °C

4-l Heating bath

PTFE-coated

4-l Heating bath for oil

Max. temperature 250 °C

Concave block adaptor

Pt 1000 clamping system

Pt 1000 clamping system for bath attachments from 3 to 5 liter

Pt 1000 temperature probe glass-coated

Pt 1000 temperature probe stainless steel

Silicone protective cover 1

For Hei-Tec, Hei-Connect, Hei-End and Hei-Mix L

Stirring bars - cross shape (16.5 mm)

Stirring bars - cylindrical shape

Stirring bars - oval shape (15x6 mm)

Stirring bars - oval shape (25x10 mm)

Stirring bars - oval shape (30x10 mm)

Stirring bars Evaluation Kit

Heating bath liquid

Up to 220 °C

Heating bath liquid

Up to 170 °C

Hei-Tec with Pt 1000 temperature probe - packages

downloads

downloads

Brochure-Gentle but powerful.pdf download
At a glance - Hei-PLATE 2018 download
CE-Magnetruehrer-Magnetic-stirrer.pdf download
NRTL-Certificate-Magnetic-stirrer.pdf download
Hei-PLATE-Certificate-for-continuous-operation.pdf download
Technical-Overview-Magnetic-Stirrers.pdf download
Operation-Manual-Magnetic Stirrer-Hei-Standard-Tec-Connect.pdf download

video