Hei-Tec

It depends on how you are intending to use vacuum ...

One of the advantages of StarFish is that you can mix and match parts to build the system that suits your application ...

The silicone rubber straps are recommended for the lower StarFish clamp ...

Yes, the magnetic stirrers Hei-Mix S and Hei-Mix L has no heating function.

For larger quantities we recommend alternatively the magnetic stirrer Hei-Mix L.

Findenser is resistant to the majority of solvents and splash-resistant to dilute acids and alkalis at room temperature ...

B joints are standard joint sizes in many countries. B joints are also sometimes referred to as ‘NS’ joints instead, so e.g. B29 (B29/32) is the same as NS 29/32, and B24 (B24/29) is the same as NS 24/29 ...

More important than the factor room temperature is the fact that the Findenser is used in the fume hood. The regular air exchange ensures that heat is dissipated to the required extent.

The calculated surface area of the Findenser Standard is 0.45 m² while the Findenser Mini offers a calculated surface area of 0.22 m².

The fins are very sturdy and can only be bent with great effort. However, bent fins do not have a negative effect on the air condenser’s performance.

No, the fins are rounded and not sharp-edged. There is no risk of injury.

Since most hemispherical heating mantles do not allow precise temperature control, their use is not recommended.

It cannot be assumed with certainty that the design would still be stable enough. For the majority of applications, an adapted temperature control (10 - 15 °C above boiling point) is perfectly adequate.

A flow of inert gas (e.g. nitrogen) through the flask will encourage evaporation and may reduce performance of the Findenser ...

The Heat-On addons and bath attachments fit on all Heidolph Hei-PLATE magnetic stirrers with heating function.
All Heat-On addons have a fixing edge, which means that they are accurately centered on plates and can no longer slip.